Concrete driveway project by Goliath Concrete

Concrete Driveways in Sydney

Plain, exposed aggregate, or coloured concrete driveways built with the right base preparation and reinforcement so they last.

Licensed by NSW Fair Trading | Fully Insured | Based in Lidcombe

Signs Your Driveway Needs Replacing

Old driveways usually fail in stages. If multiple warning signs are showing, replacement is often better value than repeated patching.

  • Cracks running across or along the surface
  • Edges crumbling or lifting near gardens and paths
  • Concrete that has shifted and now sits uneven
  • Weeds growing through expansion joints
  • Surface water pooling due to poor fall and drainage

If more than one of these sounds familiar, replacing the slab now is usually cheaper than repeated repairs.

What a Properly Built Driveway Looks Like

The difference between a driveway that lasts 30 years and one that cracks in 5 usually comes down to preparation before the truck arrives. Proper excavation depth, compaction, road base, and reinforcement are the foundation of long-term performance.

Concrete Driveway Finish Options

Your finish affects price, appearance, and long-term wear. Goliath Concrete can deliver all major residential driveway finishes.

Plain Concrete

Smooth-finished grey concrete. The most cost-effective option with a clean, neutral appearance and low ongoing maintenance.

Exposed Aggregate

Surface paste is washed back to expose stone. Slip-resistant, decorative, and highly durable with wide aggregate and colour choices.

Coloured Concrete

Oxide pigments are mixed through the slab for consistent colour depth that pairs well with brick, render, and cladding facades.

Not sure which finish suits your home? Free site visits include practical guidance using reference images and finish samples.

Driveway Client Feedback

*****

"I engaged Tony for a new driveway, extra parking space, steps and a tank slab. The quote was competitive, communication was excellent, and the finished result exceeded expectations."

Neil S., Local Guide

*****

"The outcome exceeded our expectations, clean and precise. Not just recommended, Goliath Concrete should be your first call every time."

Emilio van D.

From Quote to Handover, How We Work

Step 1

Free Measure and Quote

We inspect the driveway area, confirm finish options, and issue a written quote within 24 hours.

Step 2

Excavation and Base Prep

Existing surface removal, excavation, compaction, road base installation, formwork, and reinforcement setup.

Step 3

Pour and Finish

Concrete is poured to specification and finished in plain, exposed aggregate, or coloured format with correct control cuts.

Step 4

Cure and Protect

The slab is protected while curing. Walk after 24 to 48 hours, no vehicles for at least 7 days, full strength at 28 days.

Step 5

Clean Site Handover

Formwork removal, clean-up, spoil disposal, and maintenance handover.

Concrete Driveway Questions

Plain concrete driveways are commonly around $65 to $95 per m2 in Sydney. Exposed aggregate is usually $100 to $150 per m2. Most standard double driveways fall around $3,500 to $9,000 depending on finish and site conditions.

Foot traffic is typically fine after 24 to 48 hours. Keep vehicles off for at least 7 days. Concrete reaches full strength at around 28 days.

Yes, existing concrete or asphalt can be broken up and removed before the new slab is prepared and poured. Scope is listed in the written quote.

Australian-standard reinforcement mesh is used at the correct depth and placement for residential driveway loads and site conditions.

Concrete usually has a longer service life and lower maintenance than asphalt, with higher upfront cost but stronger long-term value for most homes.

All concrete can crack over time. Proper base prep, reinforcement, and control joint spacing help control where movement occurs and reduce structural risk.

Lead times vary by season. Booking 4 to 6 weeks in advance is usually a good approach for planned residential driveway work.

Yes. Exposed aggregate mixes are available in a broad range of stone and colour blends, with final options confirmed during site visit.

Concrete Driveways Across Sydney

Based in Lidcombe, Goliath Concrete works across the Sydney metro area for driveway projects and related concreting works.

Suburb publication list is currently withheld pending final client confirmation.

Suburb publication list is currently under confirmation. Contact us to confirm your exact suburb before scheduling.

Map and suburb confirmation are provided during quote review.

Ready to Replace Your Driveway?

Free site visit across Sydney. Written quote within 24 hours.

Free Measure and Quote

or call 0451 118 267

Get a Free Driveway Quote

We will contact you within 24 hours to confirm the site visit.

Driveways Page Confirmation Needed

  • - NSW Fair Trading licence number
  • - Confirmation that exposed aggregate and coloured concrete are currently offered on all jobs
  • - Confirmation for selected gallery images before production launch
  • - Confirmation whether existing-surface removal is included by default or line-itemed per quote